dmesg - Furmark 1080o
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-37-generic (buildd@orlo) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53~precise1-Ubuntu SMP Wed Feb 19 21:37:54 UTC 2014 (Ubuntu 3.8.0-37.53~precise1-generic 3.8.13.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3/GA-78LMT-USB3, BIOS FA 04/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x82f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000082f000000 aka 33520M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5ed0-0x000f5edf] mapped at [ffff8800000f5ed0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfdeffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
[ 0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfdeffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x82effffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] [mem 0x800000000-0x82effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x82effffff @ [mem 0xcfdee000-0xcfdeffff]
[ 0.000000] RAMDISK: [mem 0x355ac000-0x36acdfff]
[ 0.000000] ACPI: RSDP 00000000000f78e0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfdf3000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfdf3080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfdf3100 0683B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfdf0000 00040
[ 0.000000] ACPI: MSDM 00000000cfdf9a00 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000cfdf9a80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdf9ac0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000cfdf9b00 00022 (v01 GBT GBT B0 5455312E BG?? 00000101)
[ 0.000000] ACPI: APIC 00000000cfdf9940 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfdf9ba0 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000082effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x82effffff]
[ 0.000000] NODE_DATA [mem 0x82effb000-0x82effffff]
[ 0.000000] [ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080e600000-ffff88082e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x82effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00097fff]
[ 0.000000] node 0: [mem 0x00100000-0xcfdeffff]
[ 0.000000] node 0: [mem 0x100000000-0x82effffff]
[ 0.000000] On node 0 totalpages: 8383864
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3906 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13240 pages used for memmap
[ 0.000000] DMA32 zone: 834104 pages, LIFO batch:31
[ 0.000000] Normal zone: 117696 pages used for memmap
[ 0.000000] Normal zone: 7414848 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf3000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf3000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88082ec00000 s84928 r8192 d21568 u262144
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8252858
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 79de000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 32841184k/34324480k available (7180k kernel code, 789024k absent, 694272k reserved, 6063k data, 1016k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.008000] tsc: Detected 3999.968 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.93 BogoMIPS (lpj=15999872)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000026] Security Framework initialized
[ 0.000035] AppArmor: AppArmor initialized
[ 0.000035] Yama: becoming mindful.
[ 0.001773] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.009094] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.012208] Mount-cache hash table entries: 256
[ 0.012347] Initializing cgroup subsys cpuacct
[ 0.012349] Initializing cgroup subsys memory
[ 0.012355] Initializing cgroup subsys devices
[ 0.012356] Initializing cgroup subsys freezer
[ 0.012357] Initializing cgroup subsys blkio
[ 0.012358] Initializing cgroup subsys perf_event
[ 0.012360] Initializing cgroup subsys hugetlb
[ 0.012379] tseg: 00cff00000
[ 0.012380] CPU: Physical Processor ID: 0
[ 0.012381] CPU: Processor Core ID: 0
[ 0.012382] mce: CPU supports 7 MCE banks
[ 0.012388] LVT offset 1 assigned for vector 0xf9
[ 0.012394] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.012394] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.012394] tlb_flushall_shift: 5
[ 0.012479] Freeing SMP alternatives: 24k freed
[ 0.013750] ACPI: Core revision 20121018
[ 0.074674] ftrace: allocating 29409 entries in 115 pages
[ 0.925553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.965237] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[ 1.071363] Performance Events:
[ 1.071364] perf: AMD core performance counters detected
[ 1.071366] AMD PMU driver.
[ 1.071368] ... version: 0
[ 1.071369] ... bit width: 48
[ 1.071369] ... generic registers: 6
[ 1.071370] ... value mask: 0000ffffffffffff
[ 1.071371] ... max period: 00007fffffffffff
[ 1.071372] ... fixed-purpose events: 0
[ 1.071373] ... event mask: 000000000000003f
[ 1.072246] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 1.072305] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 1.164312] Brought up 8 CPUs
[ 1.164315] smpboot: Total of 8 processors activated (63999.48 BogoMIPS)
[ 1.173811] devtmpfs: initialized
[ 1.176599] EVM: security.selinux
[ 1.176600] EVM: security.SMACK64
[ 1.176601] EVM: security.capability
[ 1.176653] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
[ 1.177284] regulator-dummy: no parameters
[ 1.177324] NET: Registered protocol family 16
[ 1.177503] ACPI: bus type pci registered
[ 1.177545] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.177547] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 1.189840] PCI: Using configuration type 1 for base access
[ 1.190983] bio: create slab at 0
[ 1.191065] ACPI: Added _OSI(Module Device)
[ 1.191066] ACPI: Added _OSI(Processor Device)
[ 1.191067] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.191069] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.191846] ACPI: EC: Look up EC in DSDT
[ 1.199202] ACPI: Interpreter enabled
[ 1.199207] ACPI: (supports S0 S3 S4 S5)
[ 1.199226] ACPI: Using IOAPIC for interrupt routing
[ 1.222011] ACPI: No dock devices found.
[ 1.222015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.222071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.222073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.222356] PCI host bridge to bus 0000:00
[ 1.222359] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.222361] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.222363] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.222364] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.222366] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 1.222367] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[ 1.222378] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 1.222389] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 1.222429] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 1.222461] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.222476] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 1.222507] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 1.222521] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[ 1.222552] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 1.222582] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 1.222600] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 1.222609] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 1.222618] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 1.222627] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 1.222636] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 1.222645] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 1.222701] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 1.222713] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 1.222775] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 1.222788] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 1.222856] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 1.222874] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 1.222954] pci 0000:00:12.2: supports D1 D2
[ 1.222955] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.222978] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 1.222991] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 1.223053] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 1.223065] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 1.223133] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 1.223151] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 1.223231] pci 0000:00:13.2: supports D1 D2
[ 1.223233] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.223258] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 1.223354] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 1.223370] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 1.223378] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 1.223387] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 1.223396] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 1.223404] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 1.223461] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 1.223481] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 1.223545] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.223559] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 1.223632] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 1.223673] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 1.223686] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 1.223751] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 1.223768] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 1.223781] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 1.223794] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 1.223811] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 1.223824] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 1.223872] pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
[ 1.223882] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.223891] pci 0000:01:00.0: reg 18: [mem 0xfde80000-0xfdebffff 64bit]
[ 1.223896] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
[ 1.223906] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.223937] pci 0000:01:00.0: supports D1 D2
[ 1.223938] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 1.223965] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 1.223975] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 1.224027] pci 0000:01:00.1: supports D1 D2
[ 1.231969] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.231973] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.231976] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.231979] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.232010] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.232022] pci 0000:02:00.0: reg 10: [mem 0xfddff000-0xfddfffff 64bit]
[ 1.232075] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.239968] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.239971] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 1.239973] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.239977] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 1.240011] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 1.240023] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 1.240043] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 1.240056] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 1.240110] pci 0000:03:00.0: supports D1 D2
[ 1.240111] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.247969] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 1.247972] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 1.247975] pci 0000:00:06.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 1.247978] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.248013] pci 0000:04:06.0: [168c:002d] type 00 class 0x028000
[ 1.248038] pci 0000:04:06.0: reg 10: [mem 0xfdbf0000-0xfdbfffff]
[ 1.248199] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 1.248202] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.248206] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 1.248210] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 1.248211] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.248213] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.248214] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.248215] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 1.248217] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 1.248267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 1.248302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.248333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 1.248361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 1.248397] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.248399] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.249357] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249394] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249430] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249465] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249500] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249534] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249568] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249602] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.249687] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.249689] vgaarb: loaded
[ 1.249690] vgaarb: bridge control possible 0000:01:00.0
[ 1.249839] SCSI subsystem initialized
[ 1.249841] ACPI: bus type scsi registered
[ 1.249886] libata version 3.00 loaded.
[ 1.249900] ACPI: bus type usb registered
[ 1.249914] usbcore: registered new interface driver usbfs
[ 1.249921] usbcore: registered new interface driver hub
[ 1.249942] usbcore: registered new device driver usb
[ 1.250020] PCI: Using ACPI for IRQ routing
[ 1.258476] PCI: pci_cache_line_size set to 64 bytes
[ 1.258482] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 1.258542] e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
[ 1.258543] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
[ 1.258545] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
[ 1.258613] NetLabel: Initializing
[ 1.258614] NetLabel: domain hash size = 128
[ 1.258615] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.258624] NetLabel: unlabeled traffic allowed by default
[ 1.258672] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.258675] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.260704] Switching to clocksource hpet
[ 1.265794] AppArmor: AppArmor Filesystem Enabled
[ 1.265808] pnp: PnP ACPI init
[ 1.265815] ACPI: bus type pnp registered
[ 1.265871] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 1.265873] system 00:00: [io 0x0220-0x0225] has been reserved
[ 1.265874] system 00:00: [io 0x0290-0x0294] has been reserved
[ 1.265877] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.266402] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.266420] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.266439] system 00:01: [io 0x4100-0x411f] has been reserved
[ 1.266441] system 00:01: [io 0x0228-0x022f] has been reserved
[ 1.266443] system 00:01: [io 0x040b] has been reserved
[ 1.266444] system 00:01: [io 0x04d6] has been reserved
[ 1.266446] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 1.266447] system 00:01: [io 0x0c14] has been reserved
[ 1.266449] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 1.266450] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 1.266452] system 00:01: [io 0x0c6f] has been reserved
[ 1.266454] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 1.266455] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 1.266457] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 1.266458] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 1.266460] system 00:01: [io 0x4210-0x4217] has been reserved
[ 1.266461] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 1.266463] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 1.266464] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 1.266466] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.266468] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.266557] pnp 00:02: [dma 4]
[ 1.266571] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.266635] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.266670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.266687] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.266715] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.266855] pnp 00:07: [dma 2]
[ 1.266878] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.267079] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.267289] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.267420] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.267422] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.267581] pnp 00:0b: disabling [mem 0x000d5400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.267583] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.267585] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.267587] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.267588] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.267590] pnp 00:0b: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.267609] pnp 00:0b: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
[ 1.267626] system 00:0b: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[ 1.267628] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.267630] system 00:0b: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 1.267631] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 1.267633] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.267635] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.267636] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.267638] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.267654] pnp: PnP ACPI: found 12 devices
[ 1.267654] ACPI: ACPI bus type pnp unregistered
[ 1.273818] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 1.273820] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.273822] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.273825] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.273827] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.273830] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.273832] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 1.273834] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.273836] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 1.273839] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 1.273841] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 1.273843] pci 0000:00:06.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 1.273845] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.273848] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 1.273851] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.273855] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 1.273859] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 1.273888] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.273890] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.273891] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.273893] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.273894] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 1.273895] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.273897] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 1.273898] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.273900] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.273901] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 1.273902] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 1.273904] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 1.273905] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 1.273906] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.273908] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.273909] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 1.273911] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 1.273912] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.273913] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.273915] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.273916] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.273917] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
[ 1.273939] NET: Registered protocol family 2
[ 1.274259] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.275000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.275192] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.275219] TCP: reno registered
[ 1.275253] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.275382] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.275527] NET: Registered protocol family 1
[ 1.636775] pci 0000:01:00.0: Boot video device
[ 1.636826] PCI: CLS 64 bytes, default 64
[ 1.636870] Trying to unpack rootfs image as initramfs...
[ 1.889334] Freeing initrd memory: 21640k freed
[ 1.893749] PCI-DMA: Disabling AGP.
[ 1.893829] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.893831] PCI-DMA: using GART IOMMU.
[ 1.893833] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.897996] LVT offset 0 assigned for vector 0x400
[ 1.898031] perf: AMD IBS detected (0x000000ff)
[ 1.898199] Initialise module verification
[ 1.898226] audit: initializing netlink socket (disabled)
[ 1.898240] type=2000 audit(1395971686.904:1): initialized
[ 1.921077] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.923512] VFS: Disk quotas dquot_6.5.2
[ 1.923541] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.923910] fuse init (API version 7.20)
[ 1.923970] msgmni has been set to 32768
[ 1.924443] Key type asymmetric registered
[ 1.924446] Asymmetric key parser 'x509' registered
[ 1.924484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.924513] io scheduler noop registered
[ 1.924514] io scheduler deadline registered (default)
[ 1.924518] io scheduler cfq registered
[ 1.924614] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.924666] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 1.924712] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 1.924772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.924785] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.924860] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.924863] ACPI: Power Button [PWRB]
[ 1.924892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.924894] ACPI: Power Button [PWRF]
[ 1.924936] ACPI: acpi_idle registered with cpuidle
[ 1.928273] GHES: HEST is not enabled!
[ 1.948827] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.949950] Linux agpgart interface v0.103
[ 1.950978] brd: module loaded
[ 1.951531] loop: module loaded
[ 1.951797] libphy: Fixed MDIO Bus: probed
[ 1.951845] tun: Universal TUN/TAP device driver, 1.6
[ 1.951847] tun: (C) 1999-2004 Max Krasnyansky
[ 1.951878] PPP generic driver version 2.4.2
[ 1.951916] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.951917] ehci-pci: EHCI PCI platform driver
[ 1.951966] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.951971] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.951976] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.951987] ehci-pci 0000:00:12.2: debug port 1
[ 1.952025] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.960766] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.960782] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.960784] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.960785] usb usb1: Product: EHCI Host Controller
[ 1.960786] usb usb1: Manufacturer: Linux 3.8.0-37-generic ehci_hcd
[ 1.960788] usb usb1: SerialNumber: 0000:00:12.2
[ 1.960871] hub 1-0:1.0: USB hub found
[ 1.960874] hub 1-0:1.0: 6 ports detected
[ 1.960968] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.960972] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.960975] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.960986] ehci-pci 0000:00:13.2: debug port 1
[ 1.961019] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.972777] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.972793] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.972795] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.972796] usb usb2: Product: EHCI Host Controller
[ 1.972797] usb usb2: Manufacturer: Linux 3.8.0-37-generic ehci_hcd
[ 1.972799] usb usb2: SerialNumber: 0000:00:13.2
[ 1.972864] hub 2-0:1.0: USB hub found
[ 1.972867] hub 2-0:1.0: 6 ports detected
[ 1.972952] ehci-platform: EHCI generic platform driver
[ 1.972960] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.972981] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.972985] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.973008] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 2.032753] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.032755] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.032757] usb usb3: Product: OHCI Host Controller
[ 2.032758] usb usb3: Manufacturer: Linux 3.8.0-37-generic ohci_hcd
[ 2.032759] usb usb3: SerialNumber: 0000:00:12.0
[ 2.032835] hub 3-0:1.0: USB hub found
[ 2.032840] hub 3-0:1.0: 3 ports detected
[ 2.032908] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.032911] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.032922] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 2.092751] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.092753] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.092755] usb usb4: Product: OHCI Host Controller
[ 2.092756] usb usb4: Manufacturer: Linux 3.8.0-37-generic ohci_hcd
[ 2.092757] usb usb4: SerialNumber: 0000:00:12.1
[ 2.092833] hub 4-0:1.0: USB hub found
[ 2.092838] hub 4-0:1.0: 3 ports detected
[ 2.092905] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.092910] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.092935] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 2.152752] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.152754] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.152755] usb usb5: Product: OHCI Host Controller
[ 2.152756] usb usb5: Manufacturer: Linux 3.8.0-37-generic ohci_hcd
[ 2.152758] usb usb5: SerialNumber: 0000:00:13.0
[ 2.152834] hub 5-0:1.0: USB hub found
[ 2.152839] hub 5-0:1.0: 3 ports detected
[ 2.152907] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.152910] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.152921] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 2.212758] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212760] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212762] usb usb6: Product: OHCI Host Controller
[ 2.212763] usb usb6: Manufacturer: Linux 3.8.0-37-generic ohci_hcd
[ 2.212764] usb usb6: SerialNumber: 0000:00:13.1
[ 2.212837] hub 6-0:1.0: USB hub found
[ 2.212843] hub 6-0:1.0: 3 ports detected
[ 2.212910] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.212913] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.212924] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 2.272753] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.272755] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.272756] usb usb7: Product: OHCI Host Controller
[ 2.272758] usb usb7: Manufacturer: Linux 3.8.0-37-generic ohci_hcd
[ 2.272759] usb usb7: SerialNumber: 0000:00:14.5
[ 2.272858] hub 7-0:1.0: USB hub found
[ 2.272864] hub 7-0:1.0: 2 ports detected
[ 2.272916] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.272945] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.272949] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.273057] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 2.273088] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.273090] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273091] usb usb8: Product: xHCI Host Controller
[ 2.273093] usb usb8: Manufacturer: Linux 3.8.0-37-generic xhci_hcd
[ 2.273094] usb usb8: SerialNumber: 0000:02:00.0
[ 2.273141] xHCI xhci_add_endpoint called for root hub
[ 2.273142] xHCI xhci_check_bandwidth called for root hub
[ 2.273155] hub 8-0:1.0: USB hub found
[ 2.273158] hub 8-0:1.0: 1 port detected
[ 2.273191] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.273195] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.273211] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.273212] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273214] usb usb9: Product: xHCI Host Controller
[ 2.273215] usb usb9: Manufacturer: Linux 3.8.0-37-generic xhci_hcd
[ 2.273216] usb usb9: SerialNumber: 0000:02:00.0
[ 2.273263] xHCI xhci_add_endpoint called for root hub
[ 2.273264] xHCI xhci_check_bandwidth called for root hub
[ 2.273277] hub 9-0:1.0: USB hub found
[ 2.273282] hub 9-0:1.0: 4 ports detected
[ 2.273433] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.306966] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 2.306967] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 2.556843] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.556937] mousedev: PS/2 mouse device common for all mice
[ 2.557040] rtc_cmos 00:04: RTC can wake from S4
[ 2.557136] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.557166] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.557225] device-mapper: uevent: version 1.0.3
[ 2.557270] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 2.557342] cpuidle: using governor ladder
[ 2.557451] cpuidle: using governor menu
[ 2.557455] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.557456] EFI Variables Facility v0.08 2004-May-17
[ 2.557600] ashmem: initialized
[ 2.557687] TCP: cubic registered
[ 2.557753] NET: Registered protocol family 10
[ 2.557872] NET: Registered protocol family 17
[ 2.557878] Key type dns_resolver registered
[ 2.558368] Loading module verification certificates
[ 2.559065] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 8e2f2f6cc80151e84c7600385debfe328f065719'
[ 2.559072] registered taskstats version 1
[ 2.562336] Key type trusted registered
[ 2.563874] Key type encrypted registered
[ 2.565794] rtc_cmos 00:04: setting system clock to 2014-03-28 01:54:49 UTC (1395971689)
[ 2.565836] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 2.566612] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.567013] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.567014] EDD information not available.
[ 2.569261] Freeing unused kernel memory: 1016k freed
[ 2.569463] Write protecting the kernel read-only data: 12288k
[ 2.573141] Freeing unused kernel memory: 1000k freed
[ 2.576617] Freeing unused kernel memory: 952k freed
[ 2.592964] udevd[134]: starting version 175
[ 2.607243] Disabling lock debugging due to kernel taint
[ 2.612959] ahci 0000:00:11.0: version 3.0
[ 2.613105] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.613109] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.613902] scsi0 : ahci
[ 2.613981] scsi1 : ahci
[ 2.614091] scsi2 : ahci
[ 2.614127] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.614320] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2.614588] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90003044000, 94:de:80:c9:db:28, XID 0c900800 IRQ 44
[ 2.614590] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.614953] scsi3 : ahci
[ 2.615122] scsi4 : ahci
[ 2.615212] scsi5 : ahci
[ 2.615307] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.615310] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.615313] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.615318] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.615322] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 2.615324] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 2.616059] wmi: Mapper loaded
[ 2.618528] Floppy drive(s): fd0 is unknown type 13 (usb?)
[ 2.618586] scsi6 : pata_atiixp
[ 2.618919] scsi7 : pata_atiixp
[ 2.619224] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.619226] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.636658] FDC 0 is a post-1991 82077
[ 2.844840] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 2.896867] tsc: Refined TSC clocksource calibration: 4000.014 MHz
[ 2.896878] Switching to clocksource tsc
[ 2.932896] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.932961] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.933002] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.979384] usb 2-3: New USB device found, idVendor=058f, idProduct=6364
[ 2.979387] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.979388] usb 2-3: Product: Mass Storage Device
[ 2.979390] usb 2-3: Manufacturer: Generic
[ 2.979391] usb 2-3: SerialNumber: 058F63646476
[ 2.981461] Initializing USB Mass Storage driver...
[ 2.981597] scsi8 : usb-storage 2-3:1.0
[ 2.981651] usbcore: registered new interface driver usb-storage
[ 2.981652] USB Mass Storage support registered.
[ 2.983051] usbcore: registered new interface driver usbhid
[ 2.983053] usbhid: USB HID core driver
[ 2.985081] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:13.2-3/input1
[ 3.104843] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.104882] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.104917] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.106252] ata3.00: ATA-8: ST31500541AS, CC35, max UDMA/133
[ 3.106259] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.106905] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 3.107640] ata3.00: configured for UDMA/133
[ 3.107798] ata2.00: configured for UDMA/100
[ 3.112822] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 3.116802] ata1.00: ATA-8: KINGSTON SV300S37A120G, 505ABBF1, max UDMA/133
[ 3.116809] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.126670] ata1.00: configured for UDMA/133
[ 3.127067] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
[ 3.127276] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.127283] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.127394] sd 0:0:0:0: [sda] Write Protect is off
[ 3.127397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.127425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.127731] sda: sda1 sda2
[ 3.127973] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.129114] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 3.132076] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.132082] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.132187] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.132243] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.132369] scsi 2:0:0:0: Direct-Access ATA ST31500541AS CC35 PQ: 0 ANSI: 5
[ 3.132473] sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.132482] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.132529] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.132532] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.132557] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.179668] sdb: sdb1 < sdb5 sdb6 > sdb2
[ 3.180055] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.282834] usb 3-1: New USB device found, idVendor=145f, idProduct=0176
[ 3.282837] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.282839] usb 3-1: Product: Trust Keyboard
[ 3.291153] input: Trust Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
[ 3.291311] hid-generic 0003:145F:0176.0002: input,hidraw1: USB HID v1.11 Keyboard [Trust Keyboard] on usb-0000:00:12.0-1/input0
[ 3.300025] input: Trust Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
[ 3.300116] hid-generic 0003:145F:0176.0003: input,hidraw2: USB HID v1.11 Device [Trust Keyboard] on usb-0000:00:12.0-1/input1
[ 3.560825] usb 3-2: new full-speed USB device number 3 using ohci_hcd
[ 3.736844] usb 3-2: New USB device found, idVendor=17a0, idProduct=0302
[ 3.736851] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.736857] usb 3-2: Product: Samson GoMic
[ 3.736860] usb 3-2: Manufacturer: Samson Technologies
[ 3.746942] input: Samson Technologies Samson GoMic as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.3/input/input4
[ 3.747151] hid-generic 0003:17A0:0302.0004: input,hidraw3: USB HID v1.00 Device [Samson Technologies Samson GoMic] on usb-0000:00:12.0-2/input3
[ 3.856837] usb 8-1: new high-speed USB device number 2 using xhci_hcd
[ 3.874340] usb 8-1: New USB device found, idVendor=2109, idProduct=3431
[ 3.874342] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.874344] usb 8-1: Product: USB2.0 Hub
[ 3.874736] hub 8-1:1.0: USB hub found
[ 3.875049] hub 8-1:1.0: 4 ports detected
[ 3.981623] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.982128] scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.982679] scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.983302] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 3.983805] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 3.983911] sd 8:0:0:1: Attached scsi generic sg4 type 0
[ 3.984137] sd 8:0:0:2: Attached scsi generic sg5 type 0
[ 3.984539] sd 8:0:0:3: Attached scsi generic sg6 type 0
[ 3.989510] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 3.990750] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[ 3.991382] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[ 3.992003] sd 8:0:0:2: [sde] Attached SCSI removable disk
[ 4.152927] usb 8-1.1: new full-speed USB device number 3 using xhci_hcd
[ 4.177537] usb 8-1.1: New USB device found, idVendor=056a, idProduct=0303
[ 4.177540] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.177542] usb 8-1.1: Product: Intuos PTM
[ 4.177543] usb 8-1.1: Manufacturer: Wacom Co.,Ltd.
[ 4.253067] usb 8-1.2: new full-speed USB device number 4 using xhci_hcd
[ 4.277299] usb 8-1.2: New USB device found, idVendor=09da, idProduct=9090
[ 4.277302] usb 8-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.277304] usb 8-1.2: Product: USB Device
[ 4.277305] usb 8-1.2: Manufacturer: A4TECH
[ 4.285259] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-1/8-1.2/8-1.2:1.0/input/input5
[ 4.285445] hid-generic 0003:09DA:9090.0005: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:02:00.0-1.2/input0
[ 4.289972] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-1/8-1.2/8-1.2:1.1/input/input6
[ 4.290081] hid-generic 0003:09DA:9090.0006: input,hidraw5: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:02:00.0-1.2/input1
[ 4.963050] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 4.963052] vesafb: scrolling: redraw
[ 4.963054] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 4.973033] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90013700000, using 8128k, total 8128k
[ 4.973149] Console: switching to colour frame buffer device 240x67
[ 4.976670] fb0: VESA VGA frame buffer device
[ 5.159129] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.116722] init: ureadahead main process (387) terminated with status 5
[ 6.675255] Adding 33533948k swap on /dev/sdb6. Priority:-1 extents:1 across:33533948k
[ 7.240815] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.278464] udevd[462]: starting version 175
[ 7.693498] lp: driver loaded but no devices found
[ 7.770774] wacom: disagrees about version of symbol module_layout
[ 8.148876] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 8.371172] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.371226] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.394196] ppdev: user-space parallel port driver
[ 8.442082] AMD IOMMUv2 driver by Joerg Roedel
[ 8.442085] AMD IOMMUv2 functionality not available on this system
[ 8.446603] MCE: In-kernel MCE decoding enabled.
[ 8.452777] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251)
[ 8.452782] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.465007] lp0: using parport0 (interrupt-driven).
[ 8.481434] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 8.481481] sp5100_tco: PCI Revision ID: 0x3c
[ 8.481497] sp5100_tco: failed to find MMIO address, giving up.
[ 8.522186] EDAC MC: Ver: 3.0.0
[ 8.583419] cfg80211: Calling CRDA to update world regulatory domain
[ 8.696041] AMD64 EDAC driver v3.4.0
[ 8.696069] EDAC amd64: DRAM ECC disabled.
[ 8.696080] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.696080] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.696080] (Note that use of the override may cause unknown side effects.)
[ 8.702705] microcode: CPU0: patch_level=0x0600081c
[ 9.354595] microcode: CPU0: new patch_level=0x06000822
[ 9.354660] microcode: CPU1: patch_level=0x0600081c
[ 9.363590] microcode: CPU1: new patch_level=0x06000822
[ 9.363651] microcode: CPU2: patch_level=0x0600081c
[ 9.363659] microcode: CPU3: patch_level=0x0600081c
[ 9.372629] microcode: CPU3: new patch_level=0x06000822
[ 9.372659] microcode: CPU4: patch_level=0x0600081c
[ 9.381638] microcode: CPU4: new patch_level=0x06000822
[ 9.381670] microcode: CPU5: patch_level=0x0600081c
[ 9.381679] microcode: CPU6: patch_level=0x0600081c
[ 9.381687] microcode: CPU7: patch_level=0x0600081c
[ 9.381746] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 10.035054] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 10.035134] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 10.035192] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 10.035242] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 10.035291] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 10.035510] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 10.035512] hda-intel 0000:01:00.1: Force to non-snoop mode
[ 10.035577] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 10.051532] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
[ 10.051589] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13
[ 10.051640] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14
[ 10.051689] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15
[ 10.051736] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16
[ 10.051784] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17
[ 10.058590] ath: EEPROM regdomain: 0x809c
[ 10.058593] ath: EEPROM indicates we should expect a country code
[ 10.058594] ath: doing EEPROM country->regdmn map search
[ 10.058596] ath: country maps to regdmn code: 0x52
[ 10.058597] ath: Country alpha2 being used: CN
[ 10.058598] ath: Regpair used: 0x52
[ 10.122951] type=1400 audit(1395971697.053:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=705 comm="apparmor_parser"
[ 10.122961] type=1400 audit(1395971697.053:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=696 comm="apparmor_parser"
[ 10.123179] type=1400 audit(1395971697.053:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
[ 10.123191] type=1400 audit(1395971697.053:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=696 comm="apparmor_parser"
[ 10.123307] type=1400 audit(1395971697.053:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=705 comm="apparmor_parser"
[ 10.123322] type=1400 audit(1395971697.053:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=696 comm="apparmor_parser"
[ 10.124884] usbcore: registered new interface driver snd-usb-audio
[ 10.189479] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.189697] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90003060000, irq=20
[ 10.244565] type=1400 audit(1395971697.173:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=805 comm="apparmor_parser"
[ 10.244809] type=1400 audit(1395971697.177:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=805 comm="apparmor_parser"
[ 10.244938] type=1400 audit(1395971697.177:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=805 comm="apparmor_parser"
[ 10.250218] type=1400 audit(1395971697.181:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=788 comm="apparmor_parser"
[ 10.343104] cfg80211: World regulatory domain updated:
[ 10.343107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.343108] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.343110] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.343111] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.343112] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.343113] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.343120] cfg80211: Calling CRDA for country: CN
[ 10.345854] cfg80211: Regulatory domain changed to country: CN
[ 10.345856] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.345857] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 10.345859] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 10.688895] kvm: disabled by bios
[ 10.698206] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.703127] kvm: disabled by bios
[ 10.707055] [fglrx] Maximum main memory to use for locked dma buffers: 31501 MBytes.
[ 10.707289] [fglrx] vendor: 1002 device: 6818 count: 1
[ 10.707702] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 10.707908] [fglrx] Kernel PAT support is enabled
[ 10.707922] [fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
[ 13.570412] init: failsafe main process (936) killed by TERM signal
[ 15.441078] Bluetooth: Core ver 2.16
[ 15.441091] NET: Registered protocol family 31
[ 15.441092] Bluetooth: HCI device and connection manager initialized
[ 15.441100] Bluetooth: HCI socket layer initialized
[ 15.441101] Bluetooth: L2CAP socket layer initialized
[ 15.441106] Bluetooth: SCO socket layer initialized
[ 15.473022] Bluetooth: RFCOMM TTY layer initialized
[ 15.473029] Bluetooth: RFCOMM socket layer initialized
[ 15.473031] Bluetooth: RFCOMM ver 1.11
[ 15.589502] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.589504] Bluetooth: BNEP filters: protocol multicast
[ 15.589509] Bluetooth: BNEP socket layer initialized
[ 18.198911] r8169 0000:03:00.0 eth0: link down
[ 18.198927] r8169 0000:03:00.0 eth0: link down
[ 18.198981] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.199239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.225005] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.228092] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.936373] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[ 19.937025] [fglrx] Firegl kernel thread PID: 1501
[ 19.937089] [fglrx] Firegl kernel thread PID: 1502
[ 19.937145] [fglrx] Firegl kernel thread PID: 1503
[ 19.937231] [fglrx] IRQ 46 Enabled
[ 19.946875] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.946876] [fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[ 19.946878] [fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[ 19.946879] [fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
[ 20.277247] r8169 0000:03:00.0 eth0: link up
[ 20.277254] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 201.182438] audit_printk_skb: 69 callbacks suppressed
[ 201.182445] type=1400 audit(1395971888.023:35): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1166 comm="cupsd" pid=1166 comm="cupsd" capability=36 capname="block_suspend"
[ 233.298188] type=1400 audit(1395971920.126:36): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1166 comm="cupsd" pid=1166 comm="cupsd" capability=36 capname="block_suspend"